Preparing The Pump Set; Dismantling The Pump Section; Reassembling The Pump Set - Delta Foul V3 Installation And Operating Manual

WARNING
WARNING
Observe the general safety instructions and information.
For dismantling and reassembly observe the general assembly drawing.
In the event of damage contact our service staff Edincare Pumps on
01442 211554 or email info@edincare.com
DANGER
WARNING
Delta Foul V3 Submersible Pump
Hot surface
Risk of injury!
 Allow the pump set to cool down to ambient temperature.
Improper lifting/moving of heavy assemblies or components
Personal injury and damage to property!
 Use suitable transport devices, lifting equipment and lifting tackle to move heavy
assemblies or components.
Insufficient preparation of work on the pump (set)
Risk of injury!
 Properly shut down the pump set.
 Close the shut-off elements in the suction line and discharge line.
 Drain the pump and release the pump pressure.
 Shut off any auxiliary feed lines.
 Allow the pump set to cool down to ambient temperature.
Components with sharp edges
Risk of cutting or shearing injuries!
 Always use appropriate caution for installation and dismantling work.
 Wear work gloves.
7 Servicing/inspection
Installation and operating manual 41 of 56