Delta Foul V3 Installation And Operating Manual page 24

Figure 6. Permissible flange loads
NOTE
24 of 56 Installation and operating manual
5 Installation at site
Table 6. Permissible flange loads for Delta Foul V3 Pedestal (DN50)
Fy
1350 1650
5.3.1.3 Fitting the guide rail arrangement
The pump set is guided into the sump or tank along one vertical guide rails It
attaches itself automatically to the pedestal which has been fitted to the floor.
The guide rails are not included in Delta Membranes' scope of supply.
Select guide rail materials which are suitable for the fluid handled or as specified by
the operator.
Observe the following dimensions for the guide rails:
Table 7. Guide rail dimensions (mm)
Outside diameter
33.7
*To DIN 2440/2442/2462 or equivalent standards
5.3.1.4 Fitting the mounting bracket
The pump set is guided into the sump or tank along one vertical guide rails It
attaches itself automatically to the pedestal which has been fitted to the floor.
90-3.37
894
Forces [N]
ΣF
Fz Fx
1500 2600
Minimum
2
Figure 7. Fitting the mounting bracket.
Moments [Nm]
My Mz Mx
1000 1150 1400
Wall thickness *
Maximum
3.8
Delta Foul V3 Submersible Pump
ΣM
2050