Torque Switch Setting - AUMA SQEx 05.2 Manual

Commissioning (basic settings)
How to proceed 1. Loosen screws [2] and remove cover [1] from the switch compartment.

10.3 Torque switch setting

NOTICE
28
Figure 25: Open switch compartment
[1]
[3]
[2]
[1] Cover
[3] Indicator disc
2. If indicator disc [3] is available: Remove indicator disc [3] using a wrench (as
lever).
Information: To avoid damage to paint finish, use wrench in combination with soft
object, e.g. fabric.
Figure 26: Pull off indicator disc.
Once the set torque is reached, the torque switches will be tripped (overload protec-
tion of the valve).
Valve damage due to excessive tripping torque limit setting!
à The tripping torque must suit the valve.
à Only change the setting with the consent of the valve manufacturer.
The torque switches may also trip during manual operation.
[2] Screw for cover