Using Weights - Toro GrandStand HDX 72514 Operator's Manual

Position B
Use this position when bagging
Figure 23
Position C
This is the full, open position
position for the following:
•
In tall, dense grass mowing conditions
•
In wet conditions
•
Lowers the engine-power consumption
•
Allows increased ground speed in heavy conditions
Figure 24
(Figure 23).
g012678
(Figure 24). Use this
g012679

Using Weights

•
Install weights to improve balance. You can add or
remove weights to create optimized performance
under different operating conditions and for your
preference.
•
Add or remove weights 1 at a time until you
achieve the desired handling and balance.
•
Refer to the Operator's Manual of attachments for
recommended weights.
Note:
Contact an Authorized Service Dealer to order
a weight kit.
WARNING
Excessive weight changes can affect the
handling and operation of the machine.
This could cause serious injury to you or
bystanders.
• Make weight changes in small increments
only.
• Evaluate the machine after each weight
change to ensure that you can operate the
machine safely.
23