Toro GrandStand HDX 72514 Operator's Manual page 8

With 60in or 72in turbo force cutting unit
Table of Contents

Advertisement

147-4766
1. Read the Operator's Manual.
1. Power takeoff (PTO)—disengaged
2. Fast
3. Slow
4. Neutral
1. Warning—read the Operator's Manual.
2. Warning—all operators should be trained before operating
the machine.
3. Warning—wear hearing protection.
4. Thrown object hazard—lower the deflector before operating
the machine.
5. Cutting/dismemberment hazard of hand or foot—stay away
from moving parts; keep all guards and shields in place.
decal147-4766
131-3526
5. Reverse
6. Traction drive
7. Engage the handles.
139-2878
6. Thrown object hazard—keep bystanders away.
7. Warning—engage the parking brake, shut off the engine, and
remove the key before leaving the machine or performing
maintenance.
8. Tipping hazard—do not use dual ramps when loading onto a
trailer; use 1 ramp wide enough for the machine; back up
the ramp when loading the machine and drive forward off the
ramp when unloading.
9. Tipping hazard—do not use the machine near drop-offs or
on slopes; stay at least 2 widths of the machine away from
drop-offs.
8
decal131-3526
decal139-2878

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grandstand hdx 72517

Table of Contents