Safety And Instructional Decals - Toro GrandStand HDX 72514 Operator's Manual

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
Battery Symbols
Some or all of these symbols are on your battery.
1. Explosion hazard
2. No fire, open flames, or
smoking
3. Caustic liquid/chemical
burn hazard
4. Wear eye protection.
5. Read the Operator's
Manual.
Manufacturer's Mark
1. This mark indicates that the blade is identified as a part
from the original machine manufacturer.
1. Warning—do not touch the hot surface.
decalbatterysymbols
6. Keep bystanders away.
7. Wear eye
protection—explosive
gases can cause blindness
and other injuries.
8. Battery acid can cause
severe burns.
9. Flush eyes immediately
with water and get medical
help fast.
10. Contains lead; do not
discard.
106-5517
1. Warning—stay away from moving parts; keep all guards
and shields in place.
1. Warning—read the Operator's Manual for instructions on
torquing the blade bolt/nut to 75 to 81 N∙m (55 to 60 ft-lb).
decaloemmarkt
1. Read the Operator's
Manual.
decal106-5517
1. Wheel lug nut—torque to 129 N∙m (95 ft-lb).
2. Wheel hub nut—torque to 319 N∙m (235 ft-lb).
3. Read the Operator's Manual before performing
maintenance; check the torque after the first 100 hours and
every 500 hours after.
5
112-9028
116-8283
116-8775
2. Warning—fill to the bottom
of the filler neck; do not
overfill the tank.
126-2055
decal112-9028
decal116-8283
decal116-8775
decal126-2055