Safety; Safety-Alert Symbol; General Safety - Toro GrandStand HDX 72514 Operator's Manual

With 60in or 72in turbo force cutting unit
Table of Contents

Advertisement

Safety

This machine has been designed in accordance with
ANSI B71.4-2017.

Safety-Alert Symbol

The safety-alert symbol
manual and on the machine identifies important safety
messages that you must follow to prevent accidents.
Safety-alert symbol
The safety-alert symbol appears above information
that alerts you to unsafe actions or situations and
is followed by the word DANGER, WARNING, or
CAUTION.
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious
injury.
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
This manual uses two other words to highlight
information. Important calls attention to special
mechanical information and Note emphasizes general
information worthy of special attention.
(Figure
3) shown in this
Figure 3

General Safety

This product is capable of amputating hands and
feet and of throwing objects. Always follow all safety
instructions to avoid serious personal injury.
Read and understand the contents of this
Operator's Manual before starting the engine.
Do not put your hands or feet near moving
components of the machine.
Do not operate the machine without all guards
and other safety protective devices in place and
functioning properly on the machine.
Keep clear of the discharge opening.
g000502
Keep bystanders and children out of the operating
area. Do not allow children to operate the machine.
Allow only people who are responsible, trained,
familiar with the instructions, and physically
capable to operate the machine.
Stop the machine, shut off the engine, and remove
the ignition key before servicing, fueling, or
unclogging the machine.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always
pay attention to the safety-alert symbol
means Caution, Warning, or Danger—personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
4
, which

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grandstand hdx 72517

Table of Contents