Using Weights
•
Install weights to improve balance. You can add or
remove weights to create optimized performance
under different operating conditions and for your
preference.
•
Add or remove weights 1 at a time until you
achieve the desired handling and balance.
•
Refer to the Operator's Manual of attachments for
recommended weights.
Note:
Contact an Authorized Service Dealer to order
a weight kit.
Monitoring the
Battery-System Charge
Level
Refer to the main information screen in the InfoCenter
to determine the battery-system charge level.
•
Low battery: When the battery level reaches a
low percentage, a low-battery advisory appears
on the InfoCenter.
Finish mowing, then transport the machine to a
designated battery-charging area and charge the
batteries.
•
Limp mode: If the battery level drops below the
set limp-mode battery percentage, an advisory
appears on the InfoCenter, and the mower blades
will disengage and cannot be engaged.
Transport your machine to a designated
battery-charging area and charge the batteries.
•
Ultra-limp mode: If the battery level becomes too
low during limp mode, an advisory appears on
the InfoCenter and traction speed automatically
decreases.
Transport your machine to a designated
battery-charging area and charge the batteries.
Refer to
Charging the Lithium-Ion Batteries (page
Adjusting the Battery Percentage
for Limp Mode
1.
Park the machine on a level surface, disengage
the PTO, and move the motion-control levers
outward to the P
2.
In the M
AIN MENU
press the
3.
In the S
ERVICE
and adjust the percentage using the – and +
buttons.
28).
23
position.
ARK
, scroll down to S
ERVICE
button.
Figure 32
menu, scroll down to L
Figure 33
and
g376300
M
IMP
ODE
g430868