Removing The Fuel Tank; Replacing The Fuel Filter - Toro GrandStand HDX 72514 Operator's Manual

With 60in or 72in turbo force cutting unit
Table of Contents

Advertisement

Figure 45
1. Fuel cap

Removing the Fuel Tank

1.
Lower the platform.
2.
Release the cushion; refer to
Cushion for Rear Access (page
3.
Remove the cross bracket.
Figure 46
1. Fuel tank
4.
Remove the fuel tank and set it on the operator
platform.
Note:
If you want to move the fuel tank further
from the machine, remove the fuel and vent
lines from the top of the tank.
g273861
Releasing the
28).
g031413
2. Cross bracket

Replacing the Fuel Filter

Service Interval: Every 400 hours/Yearly (whichever
comes first)
Do not install a dirty filter if it is removed from the fuel
line.
Note:
Wipe up any spilled fuel.
1.
Park the machine on a level surface, disengage
the PTO, and engage the parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Close the fuel-shutoff valve; refer to
Fuel-Shutoff Valve (page
4.
Replace the fuel filter as shown in
36
Using the
24).
Figure
Figure 47
47.
g400217

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grandstand hdx 72517

Table of Contents