Daikin PreciseLine Series Installation And Maintenance Manual page 111

3. Pull to slide the entire coil assembly out of the cabinet.
If using support straps/hooks, pull the coil assembly out
partially and secure the supports to any of the available
lift holes.
DANGER
COIL ASSEMBLY IS HEAVY!
Failure to use the proper lifting equipment to support the weight of the
assembly can cause property damage, personal injury or death. Supports
should be able to lift the weight of the coils as detailed in
64.
4. Place the coil assembly on a flat surface.
5. To detach the individual coils, remove the screws
securing the coils to each joining bracket.
www.DaikinApplied.com
Table 29 on page
NOTE: The image below only applies to units with the
111
optional secondary coil.
IM 1267-7 • PRECISELINE AIR HANDLER
Maintenance