Daikin PreciseLine Series Installation And Maintenance Manual page 107

Hydronic Coil Removal - Vertical Unit
Sizes 006 - 020
1. Remove screws on the inside right (3) and inside left (3),
holding external filter frame.
OR
1. Remove screws holding internal filter brackets and
bottom panel assembly.
2. Remove screws holding upper and lower front panels
(number dependent on unit size).
www.DaikinApplied.com
3. Remove 2 screws holding coil.
4. Slide out coil assembly.
5. Remove screws along front of coil at bottom and top
holding coil.
107 IM 1267-7 • PRECISELINE AIR HANDLER
Maintenance