Daikin PreciseLine Series Installation And Maintenance Manual page 109

Figure 115: Remove Screws Holding Coil Sections
Together and Connectors On Each End
8. For units with the electric heat option, the electric
heat rack is attached to the cooling coil in the preheat
position. To separate the electric heat rack from the
cooling coil remove the screws on each end of the coil,
and the connectors.
Hydronic Coil Removal - Vertical Unit
Sizes 030 - 050
1. Remove screws and remove top access panel with
disconnect switch.
www.DaikinApplied.com
2. Remove screws and remove bottom access panel.
3. Remove screws and remove coils stop plate.
4. Remove screws from clamps holding distributors and cap
tubes to bracket.
109 IM 1267-7 • PRECISELINE AIR HANDLER
Maintenance