Fan Power Connectors: Cpu/Sys Fan; Case Connectors: F_Panel - VIA Technologies P4PB ULTRA-URL User Manual

Installation

Fan Power Connectors: CPU/SYS FAN

The CPUFAN (CPU fan) and SYSFAN (system fan) run on +12V and main-
tain system cooling. When connecting the wire to the connectors, always be
aware that the red wire is the Positive and should be connected to the +12V.
The black wire is Ground and should be connected to GND. Both CPU and
System fan connectors have sensors to detect fan speed.
CPUFAN
SENSOR
+12V
GND
SYSFAN
SENSOR
+12V
GND
Note: Always consult the vendor for proper CPU cooling fan.

Case Connectors: F_PANEL

The case connector block F_PANEL allow you to connect to the Power Switch,
Reset Switch, Power LED, HDD LED and SLED on the case.
2-15