Table of Contents
Advertisement
Chapter 3
USB Keyboard Support
Enable USB Keyboard Support for DOS and Windows 95. Settings: Enabled and
Disabled.
USB Mouse Support
Enable USB Mouse Support for DOS and Windows 95. Settings: Enabled and Dis-
abled.
Onboard Raid Boot ROM
Enable system to boot up with the onboard Raid system. Settings: Enabled and Dis-
abled.
SuperIO Device
Press <Enter> to enter the sub-menu and the following screen appears:
Onboard FDC Controller
Enable the onboard floppy controller. Select "Enabled" when you have installed a
floppy disk drive. Settings: Enabled and Disabled.
Onboard Serial Port 1/2
Set the base I/O port address and IRQ for the onboard serial port A/serial port B.
Selecting Auto allows BIOS to automatically determine the correct base I/O port
address. Settings: Disabled, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3 and Auto.
3-14
Advertisement
Table of Contents
