Fan Power Connectors: Cpu/Sys/Pwr Fan; Case Connectors: F_Panel - VIA Technologies P4PA User Manual

Chapter 2

Fan Power Connectors: CPU/SYS/PWR FAN

The CPUFAN (CPU fan), SYSFAN (system fan) and PWRFAN (power fan) run
on +12V and maintain system cooling. When connecting the wire to the
connectors, always be aware that the red wire is the Positive and should be
connected to the +12V. The black wire is Ground and should be connected to
GND. Both CPU and System fan connectors have sensors to detect fan speed,
but the power fan does not have sensor.
PWRFAN
Note: Always consult the vendor for proper CPU cooling fan.

Case Connectors: F_PANEL

The case connector block F_PANEL allow you to connect to the Power Switch,
Reset Switch, Power LED, HDD LED and SLED on the case.
SENSOR
+12V
GND
CPUFAN
Socket 478
2-14
SENSOR
+12V
GND
SYSFAN