VIA Technologies P4PB ULTRA-URL User Manual page 79

Note: MBFastTrak 133 Lite permits only two drives to be used for a single
Mirrored array in Auto Setup.
You would use this method if you wish to use a drive that already contains
data and/or is the bootable system drive in your system. You will need another
drive of identical or larger storage capacity.
Follow these steps:
1. Using the Spacebar, choose "Security" under the Optimize Array for section.
2. Press <Ctrl-Y> keys to Save your selection. The window below will appear.
Do you want the disk image to be duplicated to another? (Yes/No)
Y - Create and Duplicate
N - Create Only
3. Press "Y" for the Create and Duplicate option. The window below will
appear asking you to select the Source drive to use. FastBuild will copy all
data from the Source drive to the Target drive.
Channel:ID
Channel:ID
Channel:ID
1 :Master
2 :Master
4. Use the arrow keys to choose which drive contains the existing data to be
copied.
5. Press <Ctrl-Y> keys to Save selection and start duplication. The following
progress screen will appear.
Source Disk
Drive Model
Target Disk
Drive Model
[Please Select A Source Disk]
Drive Model
QUANTUMCR8.4A
QUANTUMCR8.4A
[↑] Up [↓] [ESC] Exit [Ctrl-Y] Save
A- 5
Capacity (MB)
Capacity (MB)
Capacity (MB)
8063
8063