Creating An Array For Performance; Creating A Security Array With New Drives; Creating A Security Array With An Existing Data Drive - VIA Technologies P4PB ULTRA-URL User Manual

Creating an Array for Performance

Note: MBFastTrak 133 Lite allows users to create striped arrays with 1, 2
drives.
To create an array for best performance, follow these steps:
1. Using the Spacebar, choose "Performance" under the Optimize Array for
section.
2. Select how you will use your PC most under the Typical Application usage
section. The choices are A/V Editing, Server and Desktop (the default)
3. Press <Ctrl-Y> keys to Save and create the array.
4. Reboot your system.
5. Once the array has been created, you will need to FDISK and format the
array as if it were a new single hard drive.

Creating a Security Array With New Drives

Note: MBFastTrak 133 Lite permit only two drives to be used for a single
Mirrored array in Auto Setup.
To create an array for data protection using new hard drives, follow these
steps:
1. Using the Spacebar, choose "Security" under the Optimize Array for section.
2. Press <Ctrl-Y> keys to Save your selection.
3. The window below will appear.
Do you want the disk image to be duplicated to another? (Yes/No)
Y - Create and Duplicate
N - Create Only
4. Press "N" for the Create Only option.
5. A window will appear almost immediately confirming that your Security
array has been created. Press any key to reboot the system.
6. Proceed with normal FDISK and format procedures as if you had just in-
stalled a new hard drive.

Creating a Security Array With An Existing Data Drive

Array has been created.
<Press Any Key to Reboot>
A- 4