Intended Use - IMT Analytics FlowMeter F1 User Manual

Intended use

2 Intended use
2
2
6
This product is intended for testing and calibration purposes of medical – or other
devices or systems that generate Air / O
The device is intended for users who are trained in the use of measuring devices
and who can carry out tests, repairs, calibrations, maintenance and service work on
medical or other devices. No dedicated training on this specific device is required.
The device can be used in:
• Hospital service departments
• Clinics
• Medical and non-medical devices manufacturing facilities
• Workshop / testing / laboratory facilities of independent service companies
perfroming service and repair for medical and non-medical devices
FlowMeter is intended for use in an indoor test laboratory environment. It may only be
used outside the nursing sector. It must not be used directly on patients or devices
that are connected to patients. The FlowMeter is intended for over-the-counter sale.
FlowMeter is the solution for measurements in the following areas:
• Flow ( 300 L/min)
±
• Volume (0 L – 500 000 L)
• Differential pressure ( 250 mbar)
±
• Absolute pressure in the Flow channel (0.5 – 2 bar)
• Temperature in the Flow channel (-10 – 50 °C)
• Humidity in the Flow channel (0 – 100 % RH, non-condensing)
FlowMeter is a measuring instrument for testing and calibrating pur-
pose on medical and non-medical devices or systems. It must not be
used for patient monitoring. FlowMeter must not be used directly on
patients or devices that are connected to patients.
This product is intended to be used at elevations of up to 5000 m operation altitude
in buildings.
/ N gas flows and / or gas pressures.
2 2
IMT Analytics AG