4.10 Battery Operation; 4.11 Directives And Approvals - IMT Analytics FlowMeter F1 User Manual

4.10 Battery operation

4.11 Directives and approvals

IMT Analytics AG
Operating time during battery operation: at least 4 hours.
Charging the battery
A complete charging process takes about 4 hours in normal conditions. The service
life of the battery is extended if the battery is not completely discharged. Do not store
the device with a discharged battery. Optimal state of charge for long term storage
is 80 %.
The battery is not user replaceable and must not be replaced with a
different type. Doing so may lead to an explosion, burn or fire hazard.
The device indicates visually and audibly when the battery must be
charged. Please do not store the device if the battery is in a depleted
state.
Caution: Complete depletion can damage the battery beyond
repair!
• IEC 61010-1
• IEC 61326-1
• CAN/CSA-C22.2 No. 61010-1-12
• UL 61010-1 3 Edition
rd
The device is classified as Pollution Degree 2.
The device is classified as Overvoltage Category II.
For the USB connection
V1.1 is used (12 Mbit)
For RJ-10 connection
If the device is to be actuated via the RS-232 interface, your dealer will be pleased to
provide you with a detailed protocol.
The device is not intended for use outside a building.
Simplified EU Declaration of Conformity
Hereby, IMT Analytics AG declares that the radio equipment types FlowMeter F1 and
FlowMeter F2 are in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address: www.imtanalytics.com
Specifications
4
13