IMT Analytics FlowMeter F1 User Manual page 33

IMT Analytics AG
6.5.5 Device settings
The Device menu contains all settings to configure the device:
1
No. Description
Back Go back to Settings menu
1
Screen Opens a slider to adjust the brightness
2
Brightness of the screen with the following available
choices:
10 %, 20 %, 30 %, 40 %, 50 %, 60 %,
70 %, 80 %, 90 %, 100 %
Screen Opens the screen timeout setting with the
3
Timeout following choices:
None, 1 minute, 5 minutes,
15 minutes, 30 minutes
When the time since the last user input is
longer than the screen timeout setting, the
screen brightness is reduced to a low level
to increase the battery runtime.
Any tab on the screen restores the regular
brightness level.
Language Opens the language setting with the fol-
4
lowing available choices:
English, German, Spanish, French
Serial inter- Opens the serial interface (RS-232) setting
5
face (RS-232) with the following choices:
IMT protocol, IMT fast protocol, IMT ex-
press protocol, TSI 5300 protocol
Factory Opens a window to perform the factory
6
Default reset
2
3
4
5
6
Action
Tap: Slider to adjust the
screen brightness appears
If the slider is opened:
Slide to the right:
•
screen brightness
increases
Slide to the left:
•
screen brightness
decreases
Tap: Selection of all
screen timeout settings
opens
Tap: Selection of all lan-
guages opens
Tap: Selection of the serial
interfaces (RS-232) opens
Tap on Reset!: Device
settings and screen con-
figurations will be reset to
factory defaults
Operation
6
33