Siemens SIMOTICS M 1PH8 Configuration Manual page 54

Motor description
3.4 Selection and ordering data
6) A holding brake can only be connected via a terminal box (top).
7) Power connector for motor only (not with holding brake):
Power connector for shaft height 100 only possible up to a maximum stall current of Io = 36 A.
Power connector for shaft height 132 only possible up to a maximum stall current of Io = 85 A.
Power connector not possible for shaft height 160
8) Not possible for shaft height 80
9) Only possible if 15th data position: A and B
10) Not possible with shaft height 160 and 8th data position is "4" (synchronous version)
52
1PH8 SIMOTICS M main motors
Configuration Manual, 12/2022, A5E51895839A