Clearing The Memory - wtw Cond 3300i Operating Manual

Cond 3300i/3400i
ba75684e02 03/2008

4.4.4 Clearing the memory

With this function, you can delete stored data records. 800 storage locations
will then be available again.
Note
The Clear memory function only appears when there are data records stored
in the memory. Otherwise, the measuring instrument automatically switches
to the measuring mode.
Proceed as follows to clear all data records:
1 Switch off the measuring instrument.
2 Press the <STO> key and hold it down.
3 Press the <ON/OFF> key.
The display test appears briefly on the display.
Subsequently, Sto clr appears.
TDS UpH O
S
S t o
1
c l
d
Time Baud
Day.Month No.
Year Ident
Tref25 Tref20 AutoCal DIN
LoBat
nLF Lin Cal AutoCal TEC
4 Confirm the clearing process with <RUN/ENTER>.
Pressing any other key prevents the clearing, the data records will
remain stored.
Note
The calibration data remain stored and can be called up.
Sal
mV/pH
% mg/l
m S/
cm
mbar M cm
1/ Sal
cm
r
°
C
/
% K
TP
° F
Auto Store
ARng
AR RCL
Operation
37