Clearing The Memory - wtw Oxi 330i Operating Manual

Operation
34

4.4.4 Clearing the memory

With this function, you can delete stored data records. 800 storage locations
will then be available again.
Note
The Clear memory function only appears when there are data records stored
in the memory. Otherwise, the measuring instrument automatically switches
to the measuring mode.
Proceed as follows to clear all data records:
1 Switch off the measuring instrument.
2 Press the <STO> key and hold it down.
3 Press the <ON/OFF> key.
The display test appears briefly on the display.
Subsequently, Sto clr appears.
UpH O
TDS
S
S t o
1
d c l
Time Baud
Day.Month No.
Year Ident
Tref25 Tref20 AutoCal DIN
LoBat nLF AutoCal TEC
Lin Cal
4 Confirm the clearing process with <RUN/ENTER>.
Pressing any other key prevents the clearing, the data records will
remain stored.
Note
The calibration data remain stored and can be called up.
Sal
mV/pH
% mg/l
m S/
cm
M cm
mbar
1/ cm Sal
r
° C
/
% K
TP
°
F
Auto Store
ARng
AR RCL
Oxi 330i/340i
ba52306e04 03/2008