Clearing The Memory - wtw Oxi 330i Operating Manual

Operation
34

4.4.4 Clearing the memory

With this function, you can delete stored data records. 500 storage lo-
cations will then be available again.
Note
The Clear memory function only appears when there are data records
stored in the memory. Otherwise, the measuring instrument automati-
cally switches to the measuring mode.
Proceed as follows to clear all data records:
1 Switch off the measuring instrument.
2 Press the <STO> key and hold it down.
3 Press the <ON/OFF> key.
The display test appears briefly on the display.
Subsequently, Sto clr appears.
UpH O
TDS
S
1 S t o
Time Baud
d c l
Day.Month No.
Year Ident
Tref25 Tref20 AutoCal DIN
LoBat nLF AutoCal TEC
Lin Cal
4 Confirm the clearing process with <RUN/ENTER>.
Pressing any other key prevents the clearing, the data records
will remain stored.
Note
The calibration data remain stored and can be called up.
Sal
mV/pH
% mg/l
m S/
cm
M cm
mbar
1/ cm Sal
r
° C
/
% K
TP
°
F
Auto Store
ARng
AR RCL
Oxi 330i/340i