wtw Cond 3300i Operating Manual page 34

Operation
Outputting stored
data to the
interface
(only Cond 3400i)
34
Note
If you want to search for a certain element (e.g. date), proceed as follows:
1 Using <RUN/ENTER>, select the element (e.g. date).
2 Press <▲> or <▼> repeatedly until the required date appears on the
display.
After approx. 2 s the temperature of the displayed measured value
appears.
1 Press the <RCL> key repeatedly until Sto SEr appears on the dis-
play.
TDS UpH O
S
S t o
1
S E
Time Baud
Day.Month No.
Year Ident
Tref25 Tref20 AutoCal DIN
LoBat nLF
Lin Cal AutoCal TEC
2 Press the <RUN/ENTER> key.
The complete storage content is transmitted to the interface; during
the data transmission the numbers of the currently transmitted stor-
age locations run through. After the data transmission, the measuring
instrument automatically switches to the measuring mode.
Note
You can cancel the transmission with <M> or <RUN/ENTER>.
After the instrument number, the printout contains the complete storage con-
tents in ascending order of the storage location numbers.
Sal
mV/pH
% mg/l
m S/
cm
mbar M cm
1/ Sal
cm
R
° C
/
% K
TP
° F
Auto Store
ARng
AR RCL
Cond 3300i/3400i
ba75684e02 03/2008