wtw Cond 3300i Operating Manual page 12

Commissioning
Connecting the
plug-in
power supply
(3400i)
12
You can either operate the measuring instrument with batteries or with the
plug-in power supply. The plug-in power supply supplies the conductivity
measuring instrument 3400i with low voltage (12 V DC). This saves the bat-
teries.
Warning
The line voltage at the operating site must lie within the input voltage range
of the original plug-in power supply (see
chapter 7 T
ECHNICAL DATA
Warning
Use original plug-in power supplies only (see
chapter 7 T
ECHNICAL DATA
3
1 Plug the jack (1) into the socket (2) of the measuring instrument.
2 Connect the original WTW plug-in power supply (3) to an easily ac-
cessible mains socket.
Note
You can also measure without the plug-in power supply.
).
).
Cond 3300i/3400i
2
1
ba75684e02 03/2008