Endress+Hauser Liquiphant FTL31 IO-Link Operating Instructions Manual page 47

Liquiphant FTL31 IO-Link
Navigation
Description
Value at switch-on
Selection
Factory setting
15.2.2 System
Operating hours
Navigation
Description
µC-temperature
Navigation
Description
Unit changeover (UNI) - µC-Temperature
Navigation
Description
Endress+Hauser
Parameter → Application → Output Switch 1/2 → Output
1/2 (OU1/OU2)
Hysteresis: Determining whether sensor is free or covered.
Last function selected prior to switching off.
• Hysteresis normally open (MIN)
• Hysteresis normally closed (MAX)
Output 1 (OU1): HNO
Output 2 (OU2): HNC
Parameter → System → Operating hours
This parameter counts the operating hours in minutes
during the period in which operating voltage is present.
Parameter → System → µC-temperature
This parameter displays the current µC-temperature on the
electronics.
Parameter → System → Unit changeover (UNI) - µC-
Temperature
This parameter is used to select the electronics temperature
unit. Once a new electronics temperature unit has been
selected, the value is converted to the new unit and
displayed.
Description of device parameters
47