Endress+Hauser Liquiphant FTL31 IO-Link Operating Instructions Manual page 48

Description of device parameters
Switch on value
Options
Factory setting
Minimum µC-temperature
Navigation
Description
Maximum µC-temperature
Navigation
Description
Reset µC-Temperature
Navigation
Description
Standard Command
48
Last unit selected prior to switching off.
°C
°F
K
°C
Parameter → System → Minimum µC-temperature
This parameter is used as the minimum peak indicator and
makes it possible to call up retroactively the lowest
electronics temperature measured.
If the value of the peak indicator is overwritten, the value is
automatically set to the temperature currently measured.
Parameter → System → Maximum µC-temperature
This parameter is used as the maximum peak indicator and
makes it possible to call up retroactively the highest
electronics temperature measured.
If the value of the peak indicator is overwritten, the value is
automatically set to the temperature currently measured.
Parameter → System → Reset µC-Temperature
This parameter displays the current µC-temperature on the
electronics.
Liquiphant FTL31 IO-Link
Endress+Hauser