Body Solid GCEC-340 Manual page 8

STEP
I I Be careful to assem ble all com ponents
■ ^ 1 in the sequence they are presented.
N O T E : Finger tighten all hardware in this step.
Do Not w rench tighten until the end of Step 3.
A. Slide both Foot Caps (12) into Multi-Hip Vertical Frame (K).
B. Slide both Foot Caps (12) into Rear Base Frame (H).
C. Attach both Rubber Clips (25) onto Main Base Frame (A) as shown.
D. Slide Foot Cap (12) into Leg Extension Frame (B).
E. Attach Rubber Clip (25) onto Leg Extension Frame (B).
F. Insert Multi-Hip Vertical Frame (K) into Leg Extension Frame (B) and secure using:
O ne 4 (M 1 0 x 6 5 h e x head b olt)
T w o 9 (M 1 0 w a s h e r)
O ne 7 (M 1 0 nylon nut)
G. Connect Leg Extension Frame (B) to Main Base Frame (A) using:
T w o 2 (M 1 2 x 7 5 h e x head bolt)
T w o 8 (M 1 2 w a s h e r)
T w o 6 (M 1 2 nylon nut)
H. Connect Rear Base Frame (H) to Main Base Frame (A) using:
T w o 2 (M 1 2 x 7 5 h e x head bolt)
T w o 8 (M 1 2 w a s h e r)
T w o 6 (M 1 2 nylon nut)
m m 0 10 20 30 40 50 60 70 80 90 100 110
8
120 130 140 150