Related Manuals for Optimum V99S
Summary of Contents for Optimum V99S
- Page 1 OPTIMUM ® M A S C H I N E N - G E R M A N Y Assembly instruction Version 1.0 Table feed V99S V250S 3352030 3352021...
- Page 2 Dear customer, Thank you very much for purchasing a product made by OPTIMUM. OPTIMUM accessories for metal working machines offer a maximum of quality, technically opti- mum solutions and convince by an outstanding price performance ratio. Continuous enhance- ments and product innovations guarantee state-of-the-art products and safety at any time.
-
Page 3: Intended Use
® M A S C H I N E N - G E R M A N Y Automatic table feed V99S / V250S Intended use The automatic - universal table feed milling machines used for moving a table in an axial plane. -
Page 4: Scope Of Delivery
Adjustable Accessories stops Mounting adapter Limit switch Table feed V 250 Img. 1-2: Scope of delivery V250S V 99 S │V 250 S Automatic table feed V99S / V250S Page 4 Translation of the original instructions Version 1.0 dated 2019-01-31... - Page 5 OPTIMUM ® M A S C H I N E N - G E R M A N Y Operation and mounting V99S Buildup - automatic table feed Direction lever RAPID-SWITCH, Rapid traverse button Operation control CIRCUIT-BREAKER, light Fuse switch...
- Page 6 Universal table feed mounting Attention! Be sure the drive gear cam into the gear of automatic feed of the cross table. V 99 S │V 250 S Operation and mounting V99S Page 6 Translation of the original instructions Version 1.0 dated 2019-01-31...
- Page 7 Attach the limit switch on the bracket with two Allen screws. Limit switch Img. 2-9: Limit switch mounting Fix the power cable Operation and mounting V99S V 99 S │V 250 S Version 1.0 dated 2019-01-31 Translation of the original instructions Page 7...
- Page 8 Slide in the adjustable stops with slot nut in the rail of the cross table. Set the position of the stops. Slot nut Clamping nut Img. 2-10: Adjustable stop V 99 S │V 250 S Operation and mounting V99S Page 8 Translation of the original instructions Version 1.0 dated 2019-01-31...
- Page 9 OPTIMUM ® M A S C H I N E N - G E R M A N Y Operation table feed V99S CAUTION! Independent startup! Always set the direction lever to the neutral center position. ON/ OFF, switches the universal table feed On or Off.
- Page 10 OPTIMUM ® M A S C H I N E N - G E R M A N Y Operation and mounting V250S Buildup - automatic table feed Direction lever Rapid traverse button Speed control with scale Operation control light...
-
Page 11: Technical Specification
OPTIMUM ® M A S C H I N E N - G E R M A N Y Technical specification V 250S Connection 220 V; ~ 50 / 60 Hz max. torque [ Nm ] 73.5 Nm Gearbox transmission ratio 4.8: 1... - Page 12 OPTIMUM ® M A S C H I N E N - G E R M A N Y Mount the mounting adapter to the milling machine. Bearing Img. 3-5: Adapter mounting Slide the table feed onto the spindle.
- Page 13 OPTIMUM ® M A S C H I N E N - G E R M A N Y Attach the scale ring with the scale nut. Scale holder Scale nut Img. 3-8: Scale mounting Mount the crank handle back to the milling machine and fix the crank handle with the nut.
- Page 14 OPTIMUM ® M A S C H I N E N - G E R M A N Y Mounting of adjustable stops Slide in the adjustable end stops with a nut in the rail of the cross table.
- Page 15 OPTIMUM ® M A S C H I N E N - G E R M A N Y ATTENTION! Do not switch the drive from left to right rotation during operation. Wait until the universal table feed has stopped.
-
Page 16: Maintenance
1. Make sure that the power 1. Make sure that the power cable is well con- cable is well connected. nected. Then switch on the power supply. V99S/ V250S 2. Make sure that the power 2. Switch on the power switch. does not work switch is on. - Page 17 OPTIMUM ® M A S C H I N E N - G E R M A N Y Ersatzteile - Spare parts - V99S V 99 DE│GB Version 1.0 2019-01-31 Originalbetriebsanleitung...
- Page 18 OPTIMUM ® M A S C H I N E N - G E R M A N Y V99S - Tischvorschub - Table feed Grösse Artikelnummer Pos. Bezeichnung Designation Size Item no. A-0100x Gehäuse Housing 03352022A-0100x A-100-08C 19 x19 HW-3A...
- Page 19 OPTIMUM ® M A S C H I N E N - G E R M A N Y C-0507-1- 4P Schalter Switch 03352022C-0507-1- 4P C-0509 Buchse Bushing 03352022C-0509 D-0701 Unterer Deckel Lower Lid 03352022D-0701 E-0901X Gehäuse Housing 03352022E-0901X E-0902X...
- Page 20 OPTIMUM ® M A S C H I N E N - G E R M A N Y E-0934-03 Unterlegscheibe Washer 6205 03352022E-0934-03 E-0934-04 Getriebekupplung Transmission clutch 03352022E-0934-04 E-0934-4 Getriebe Transmission 03352022E-0934-4 E-0935 Verschluß Closure 5/16" x 24 03352022E-0935...
- Page 21 OPTIMUM ® M A S C H I N E N - G E R M A N Y Ersatzteile - Spare parts - V250S V 250 DE│GB Version 1.0 2019-01-31 Originalbetriebsanleitung...
- Page 22 OPTIMUM ® M A S C H I N E N - G E R M A N Y V250S Grösse Artikelnummer Bezeichnung Designation Size Item no. Gehäuse Housing 0335202501 Zahnradmutter Gear Nut 0,2 x 34 x 45 mm 0335202502...
- Page 23 OPTIMUM ® M A S C H I N E N - G E R M A N Y Kabel Cable 22 AWG x L 100 mm Lager Bearing 627 ZZ 0335202544 Lager Bearing 608 ZZ 0335202545 Halter Mikroschalter Micro switch holder...
- Page 24 OPTIMUM ® M A S C H I N E N - G E R M A N Y Nabe Getriebe Hub Gear 0335202587 Ring Ring IR 24 0335202588 Sicherungsring Snap Ring 0335202589 Sicherungsring Snap Ring 0335202590 Mikroschalter Micro Switch...
-
Page 25: Ec Declaration Of Conformity
M A S C H I N E N - G E R M A N Y EC - Declaration of Conformity Installation declaration for incomplete machines according to Annex II B of the Machinery Directive 2006/42/ Optimum Maschinen Germany GmbH The manufacturer / seller and author- Dr.-Robert-Pfleger-Str. 26... - Page 26 M A S C H I N E N - G E R M A N Y Appendix to the installation declaration V99S and V250S List of the health and safety requirements to be applied and adhered to for the product specified on page 1 for the design and construction of machines.
- Page 27 OPTIMUM ® M A S C H I N E N - G E R M A N Y 01/05/2012.Laser radiation not applicable 01/05/2013.Emissions of hazardous materials and substances 01/05/2014.Risk of being trapped in a machine 01/05/2015.Risk of slipping, tripping or falling ...
- Page 28 OPTIMUM ® M A S C H I N E N - G E R M A N Y 3.5.2. Fire 3.5.3. Emissions of hazardous substances Information and indications 3.6.1. Signs, signals and warnings 3.6.2. Marking ...
- Page 29 OPTIMUM ® M A S C H I N E N - G E R M A N Y 6.4.3. Access to the carrier not applicable Marking not applicable...
- Page 30 OPTIMUM ® M A S C H I N E N - G E R M A N Y...