Table of Contents
Advertisement
Available languages
Available languages
2.6
Speeds
Spindle speeds ~50Hz [ min
Spindle speeds ~60Hz [ min
Number of steps
2.7
Floor loading
Machine weight [kg]
2.8
Environmental conditions
Temperature [° C]
Relative humidity [%]
2.9
Operating material
Gear oil for spindle sleeve gear 2.5 liters
Toothed rod and drill column
2.10
Coolant equipment
Max. height of pressure [m]
Tank capacity [cm
max. delivery volume [ l/min ]
2.11
Emissions
The airborne noise of the drilling machine is 76 to 80 dB (A) at the operator position and operat-
ing conditions in accordance with DIN ISO 8525. If the machine is installed in an area where
various machines are in operation, the noise exposure (immission) on the operator of the drill-
ing machine at the working place may exceed 85 dB(A).
INFORMATION
This numerical value was measured on a new machine under proper operating conditions.
Depending on the age respectively on the wear of the machine it is possible that the noise
behaviour of the machine changes.
Furthermore, the factor of the noise emission is also depending on manufacturing influencing
factors, e.g. speed, material and clamping conditions.
INFORMATION
The mentioned numerical value is an emission level and not necessarily a safe working level.
Though there is a dependency between the degree of the noise emission and the degree of the
noise disturbance it is not possible to use it reliably to determine if further precaution measures
are required or not.
The following factors influence the actual degree of the noise exposure of the operator:
Characteristics of the working area, e.g. size or damping behaviour,
Other noise sources, e.g. the number of machines,
Other processes taking place in the proximity and the period of time during which the oper-
ator is exposed to the noise.
GB
B50 GSM
74
-1
]
-1
]
original parts or series components expressly
authorized by Optimum Maschinen Germany
original parts or series components expressly
authorized by Optimum Maschinen Germany
3
]
Originalbetriebsanleitung
54 - 2090
65 - 2580
18
950
5 - 35
25 - 80
HLP 46 or a comparable oil
GmbH. on page 103
commercial lubricating grease
GmbH. on page 103
3
5000
2
Technical data
Version 1.1.4 - 2021-01-04
Advertisement
Table of Contents
