Emergency-Stop Push Button - Optimum OPTImill BF 20V Operating Manual

If a safety device has been activated or has failed, the drilling-milling machine must only be
used if you
have removed the cause of the failure,

have verified that there is no danger resulting for the staff or objects.

WARNING!
If you bypass, remove or deactivate a safety device in any other way, you are
endangering yourself and other staff working with the drilling-milling machine. The
possible consequences are
injuries may occur due to workpiece or parts of workpieces flying off,

contact with rotating parts,

fatal electrocution.

The drilling-milling machine includes the following safety devices:
an EMERGENCY STOP push button,

a protective cover on the drilling / milling head.

a separating protective device on the milling spindle,

WARNING!
The separating protective equipment which is made available and delivered together
with the machine is designed to reduce the risk of workpieces or fractions of them which
being expelled, but not to remove them completely. Always work carefully and observe
the limit values of your chipping process.
1.9.1

EMERGENCY-STOP push button

The EMERGENCY STOP push button
switches off the drilling-milling machine.

"Switching on the drilling-milling
machine" on page 28
ATTENTION!
The emergency stop push button stops the drilling-milling machine the moment it is
activated.
Press the EMERGENCY STOP push button only if there is a risk! If this push button is
actuated in order to switch off the drilling-milling machine in the standard operation the
tool or workpiece might get damaged.
After having actuated the EMERGENCY STOP, turn the knob of the particular push button to
the right in order to restart the machine.
Version 4.0.2 dated 2019-4-3
Emergency stop
Img.1-1:
Translation of the original instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
EMERGENCY-STOP push button
BF20V | BF20L | BF20LD
®
GB
Page 13