EN
11
Counter
The generator provides a counter which can measure various parameters (such as
frequency, period, duty cycle, positive pulse width and negative pulse width) of external
input signal.
Press [Utility] >
singal to the Counter connector on the rear panel measure.
Press
Exit
Press
Gate Time
value.
The default value is 1s and the settable range is 10ms to 16s.
Copyright © Qingdao Hantek Electronics Co., LTD
Counter
softkey on the front panel to enable counter function. Input the
softkey or any other key to exit the counter.
softkey and use the direction keys and the knob to modify the current
Figure 11.1 Counter
Counter
HDG3000B User manual
67