Table of Contents
Advertisement
Chapter 8 Counter
The generator provides a counter which can measure various parameters (such as frequency,
period, duty cycle, positive pulse width and negative pulse width) of external input signal.
Press[Utility] >Countersoftkey on the front panel to enablecounter function.Input the singal to the
Counter connector on the rear panel measure.
Press Exit softkey or any other key toexit the counter.
PressGate Time softkey and use the direction keys and the knob to modify the current value.
The default value is 1s and the settable range is 10ms to 16s.
User Manual
65
Advertisement
Table of Contents
