Modulation
8.12.1
Select OSK Modulation
Press [Mod] >
⚫
When
Mod
⚫
After OSK is enabled, the instrument will generate OSK waveform with the
currently specified carrier and modulating waveforms. To avoid multiple waveform
changes, enable modulation after configuring the other modulation parameters.
8.12.2
Carrier Waveform Shape
OSK carrier waveform can only be sine waveform. Press [Wave] >
front panel to select.
8.12.3
Carrier Waveform Frequency
For different carrier waveforms, the settable range of carrier frequency is different.
Please refer to "Frequency Characteristics" in Specifications. The default value is 1kHz.
Press [Setting] >
keypad or direction keys and knob to input the desired frequency value.
8.12.4
Modulation Source
Press [Mod] >
source.
internal Source
When internal modulation source is selected, the modulating waveform is set as a
Square with 50% duty cycle, and the intermittence time and oscillate time of the output
HDG3000B User manual
54
Figure 8.1 OSK Modulation
Type
>
OSK
softkey to enable OSK function.
is enabled,
Sweep
or
Burst
Frequency
softkey on the front panel, and then use the numeric
Source
softkey to select Internal (default) or External as the modulation
will be disabled automatically.
Sine
Copyright © Qingdao Hantek Electronics Co., LTD
EN
softkey on the