Arbitrary Waveform Output; Enable Arbitrary Waveform; Select Arbitrary Waveform; Figure 6.1 Arbitrary Interface - Hantek HDG3000B Series User Manual

Arbitrary Waveform Output

6 Arbitrary Waveform Output
HDG3000B can output the built-in waveforms and user-defined arbitrary waveforms
from a single channel or from two channels at the same time. The 160 kinds of built-in
waveforms are stored in the internal non-volatile memory. The user-defined arbitrary
waveforms can contain 64 to 2M data points. Users can edit the arbitrary waveforms via
the PC software and then download them to the instrument.
This chapter introduces how to configure the generator to output arbitrary waveforms.
6.1

Enable Arbitrary Waveform

Press [Wave] >
operation menu of the arbitrary waveform.
To set the basic parameters of arbitrary waveforms, refer to "Set the Parameters".
Type:
Select the built-in waveforms or user-defined arbitrary waveform stored in external
storage.
6.2

Select Arbitrary Waveform

The HDG3000B allows the user to select arbitrary waveform in the internal or external
memory of the instrument for output.
Press [Wave] >
Select more than 160 kinds of arbitrary waveform built in HDG3000B, as shown in the
following table. Press the softkey and select a type ("Math", "Project", "Distribution
function" and "Trigonometric function", "Window function" and "biology"), and press the
corresponding softkey type to select the desired waveform.
Build-In Waveform
HDG3000B User manual
26
Arb softkey to enable the arbitrary waveform function and open the
Figure 6.1 Arbitrary Interface
Arb > Type softkey to select the built-in waveform.
Copyright © Qingdao Hantek Electronics Co., LTD
EN