Set The Harmonic Type; Set The Harmonic Amplitude - Hantek HDG3000B Series User Manual

EN
value. The range is limited by the maximum output frequency of the instrument as well
as the basic waveform frequency.
⚫
Range: integers within 2 to maximum output frequency of the instrument ÷ basic
waveform frequency.
⚫
The maximum value is 16.
7.4

Set the Harmonic Type

HDG3000B can output even harmonics, odd harmonics or all orders of harmonics.
Press [Wave] >
menu, and press
1. Even
Select this type and the instrument would output basic waveform and even
harmonics.
2. Odd
Select this type and the instrument would output basic waveform and odd
harmonics.
3. All
Select this type and the instrument would output basic waveform and all the
harmonics in order.
Note: The harmonics actually output is determined by the "Order" currently
specified.
7.5

Set the Harmonic Amplitude

Press [Wave] >
Amplitude softkey to set the amplitude of each harmonic.
1. Index:
Press this softkey to select the index number of the harmonic to be selected.
2. Amplitude:
Press this softkey to set the amplitude of the selected subharmonic. Use the
numeric keypad to input the amplitude value and then select the desired unit from
the pop-up menu, or use the direction keys and knob to modify the current value.
⚫
For the input method of amplitude value, please refer to the introduction in
"Parameter Setting Method".
⚫
The amplitude units available are Vpp and mVpp.
Copyright © Qingdao Hantek Electronics Co., LTD
Harmonic softkey on the front panel to enter the harmonic setting
Type softkey to select the desired harmonic type.
Harmonic softkey to enter the harmonic setting menu and press
Harmonic Output
HDG3000B User manual
33