Figure 12.2 New File Interface - Hantek HDG3000B Series User Manual

EN
Refresh.
New File
In Store interface, rotate the knob to select home disk or usb disk, and then press
softkey to enter the filename editing interface, as shown in the figure below.
1. Press Type
File: Create a new state file.
Directory: Create a new directory.
2. Press Swi Focus
Name: Put the cursor in the Filename Input Area. Use direction keys to move the
cursor position and specify the location of the modified character.
Keypad: Put the cursor in the Virtual Keyboard. Rotate the knob to move the cursor
position and press down the knob to input the character. In the virtual keyboard,
rotate the knob to select Caps and press down to switch between uppercase and
lowercase; rotate the knob to select Shift and press down to switch some symbols.
3. Press Back
4. Press Delete
5. After entering the file name in the Filename Input Area, press Save softkey to save
the state file.
6. Press Return
Save
Press Save
Recall
Press Recall
Rename
Copyright © Qingdao Hantek Electronics Co., LTD

Figure 12.2 New File Interface

softkey to select "File".
softkey and select Name or Keypad.
softkey to remove the characters in front of the cursor one by one.
softkey to delete all the characters in the Filename Input Area.
softkey to exit the New menu and return to the previous menu.
softkey to automatically create a new state file and save it.
softkey to recall the state file or arbitrary waveform file.
Store
New
HDG3000B User manual
69