Arbitrary Waveform Output; Enable Arbitrary Waveform; Select Arbitrary Waveform; Figure 6.1 Arbitrary Interface - Hantek HDG3000C Series User Manual

EN
6

Arbitrary Waveform Output

HDG3000C can output the built-in waveforms and user-defined arbitrary waveforms
from a single channel or from two channels at the same time. The 160 kinds of built-in
waveforms are stored in the internal non-volatile memory. The user-defined arbitrary
waveforms can contain 64 to 2M data points. Users can edit the arbitrary waveforms via
the PC software and then download them to the instrument.
This chapter introduces how to configure the generator to output arbitrary waveforms.
6.1

Enable Arbitrary Waveform

Press [Wave] >
operation menu of the arbitrary waveform.
To set the basic parameters of arbitrary waveforms, refer to "Set the Parameters".
Type:
Select the built-in waveforms or user-defined arbitrary waveform stored in external
storage.
6.2

Select Arbitrary Waveform

The HDG3000C allows the user to select arbitrary waveform in the internal or external
memory of the instrument for output.
Press [Wave] >
Select more than 160 kinds of arbitrary waveform built in HDG3000C, as shown in the
following table. Press the softkey and select a type ("Math", "Project", "Distribution
function" and "Trigonometric function", "Window function" and "biology"), and press the
Copyright © Qingdao Hantek Electronics Co., LTD
Arb softkey to enable the arbitrary waveform function and open the
Arbitrary Interface
Figure 6.1
Arb > Type softkey to select the built-in waveform.
Arbitrary Waveform Output
HDG3000C User manual
27