Pnp/Pci Configurations - Boser HS-6250 Manual

Celeron / coppermine / tualatin industrial single board computer
Table of Contents

Advertisement

Primary INTR::
When On, user can define the IRQ Activity Monitoring from the
devices listed on its IRQ table.
IRQ Activity Monitoring::
When On, activity will neither prevent the system from going into a
power management mode nor awaken it.
IRQ3 (COM2)
IRQ4 (COM1)
IRQ5 (LPT 2)
IRQ6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir)
4.9

PnP/PCI Configurations

This section describes configuring the PCI bus system. PCI, or
Personal Computer Interconnect, is a system that allows I/O devices to
operate at speeds nearing the speed the CPU itself uses when
communicating with its own special components. This section covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.
CMOS Setup Utility-Copyright ©1984-2001 Award Software
PNP OS Installed
Reset Configuration Data
Resources Controlled By
IRQ Resources
DMA Resources
PCI/VGA Palette Snoop
Assign IRQ For VGA
Assign IRQ For USB
: Select Item + / - /PU/PD: Value
F5: Previous Values
F6: Fail-Safe Defaults
52
PnP/PCI Configurations
[Yes]
[Disabled]
[Auto, ESCD]
[Press Enter]
[Press Enter]
[Disabled]
[Enabled]
[Enabled]
F10: Save
F7: Optimized Defaults
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
Item Help
Menu Level
Select Yes if you are
using a plug and play
capable operating
system. Select No
if you need the BIOS
to configure
non-boot devices
ESC: Quit
F1: General Help

Advertisement

Table of Contents
loading

Table of Contents