Table of Contents
Advertisement
www.ti.com
•
Includes multiple power management solutions for the AFE5805 and other devices.
•
Onboard Vcntl generator (0 V - 1.2 V).
1.3
Power Supplies
The AFE5805EVM requires only ±5-V power supplies for operation.
1.4
Indicators
The AFE5805EVM has four LEDs onboard as shown in
the normal operation of the AFE5805EVM.
•
LED1, LED2: +3.3-VA and +3.3-VD power supply indicators. They show the normal operation of 3.3-V
power regulators.
•
LED 3: MCU operation indicator. Flashing state can indicate the normal operation of the MSP430 when
the MSP430 is appropriately programmed.
•
LED 4: 1.8-V power indicators
SLOU222C – March 2008 – Revised March 2015
Submit Documentation Feedback
Figure 1. AFE5805EVM LED Locations
Copyright © 2008–2015, Texas Instruments Incorporated
Figure
1. The states of these LEDs demonstrate
LED 4
Introduction
3
AFE5805EVM
Advertisement
Table of Contents
