Table of Contents
Advertisement
Choking hazard!
Prevent children from accessing packaging materials, for instance: plastic
bags and EPS.
•
If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
•
Be careful not to damage the rating plate and warning labels affixed to the
appliance.
5.2
Positioning
ATTENTION!
Before installation check if there are no objects nor materials in the
installation area that might get damaged by steam, which could get
out of the appliance during operation or, alternatively, make sure
EN
that they are properly secured.
•
Never place the appliance in humid or wet environment.
•
Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
•
The appliance should be placed on a surface that is:
– even, with sufficient load-bearing capacity, resistant to water, dry and
resistant to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
•
The appliance should be installed only in a room, in which ambient temperature
falls in the range of 4–40°C.
•
The relative humidity may not exceed the following values: max. 30% at 40°C /
max. 90% at 20°C.
•
Do not install the appliance in an immediate vicinity of heat sources exceeding
50°C.
•
Never subject the appliance to adverse weather conditions (rain, sunshine, etc.).
12 / 32
CAUTION!
Installation Instructions
110644
Advertisement
Table of Contents
