Table of Contents
Advertisement
Operation and Maintenance Instructions
Messages
1. When the Start key (4) is pressed for a couple of seconds, one by one, a boiler
temperature, wash-tank temperature and number of wash cycles executed by
the appliance will be shown.
These pieces of information are shown for a minute and they may be called-up,
both, before and during the washing cycle.
2. Press and hold the program selection key (3) for a couple of seconds to
permanently show, one by one and for all programs, the boiler temperature and
wash-tank temperature.
3. To deactivate the function, press and hold the program selection key (3) for a
couple of seconds.
Overview of Possible Messages
Door open
Rinsing agent
temperature
Washing temperature
Bed regeneration
required or in progress
Add salt
110644
Wash cycles executed
Program end
Automatic program
start activated
Unlimited washing
program
Service
25 / 32
EN
Advertisement
Table of Contents
