Table of Contents
Advertisement
5.2
Positioning
ATTENTION!
Before the appliance's installation, carefully check the conditions of
the location in which the appliance is to be set to exclude any
subsequent damages which may appear during operation.
•
Never place the appliance in humid or wet environment.
•
Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
•
The appliance should be placed on surfaces that are:
– even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
•
The appliance should be installed only in a room, in which ambient temperature
EN
falls in the range of 5°C – 40°C.
Fig. 7
5.3
Electrical Connection
•
Verify if the technical specification of the appliance (see the rating plate)
correspond to the local electricity grid.
•
Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
•
The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
•
The appliance is ready for installation and equipped with a power cord of 1.3 m
in length with a plug.
12 / 28
•
The appliance is equipped with height-
adjustable feet.
•
To level the appliance, screw the feet out to
the required height.
•
Correct levelling is necessary to ensure
optimum performance of the appliance.
Installation Instructions
110500
Advertisement
Table of Contents
