Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bartscher E500D LPR
Summary of Contents for Bartscher E500D LPR
- Page 1 E500D LPR 110512...
- Page 2 Bartscher GmbH Phone: +49 5258 971-0 Franz-Kleine-Str. 28 Fax: +49 5258 971-120 Technical Support Hotline: +49 5258 971-197 D-33154 Salzkotten Germany www.bartscher.com Version: 1.0 Date of preparation: 2019-08-15 Original operation manual...
- Page 3 Bes chr eibung Dimensions / supply lines (mm) Fig. 1 Current Water Rinsing Cleaning Drain Potential Connection agent agent equalization strip Fig. 2 Fig. 3...
- Page 4 Fig. 4 Fig. 5...
-
Page 5: Table Of Contents
Safety ......................2 Explanation of signal words ..............2 Safety instructions..................3 Intended use .................... 5 Unintended Use ..................5 General information ..................6 Liability and warranty ................6 Copyright protection ................. 6 Declaration of conformity ................. 6 Transport, packaging and storage ..............7 Delivery Check .................. -
Page 6: Safety
Safety Diese Bedi enungsanlei tung besc hrei bt di e Installation, Bedi enung und Wartung des Geräts und gilt als wic htige Infor mationsquelle und N achschl agewer k. Di e Kenntnis aller enthaltenen Sic herheits hinweis e und H andlungs anweisungen schafft die Vorauss etz ung für das sichere und s ac hger echte Ar beiten mit dem Gerät. D arüb er hi naus müs sen die für den Ei ns atz ber eic h des Geräts geltenden ör tlichen Unfall verhütungs vorsc hriften und allgemeinen Sicherheits besti mmungen eing ehalten wer den. Dies e Bedi enungs anleitung is t Bes tandteil des Produkts und muss i n unmi ttelbarer N ähe des Ger äts für das In¬s tall ations-, Bedi enungs-, Wartungs- und R einigungspers onal jederzeit z ugänglich auf¬bewahrt werden. Wenn das Ger ät an eine dritte Pers on weiterg egeben wird, muss die Bedi enungsanlei tung mit ausgehändigt wer den. -
Page 7: Safety Instructions
Safety WARNING! The signal word WARNING warns against hazards that may lead to moderate or severe injuries or death if the hazards are not avoided. CAUTION! The signal word CAUTION warns against hazards that may lead to light or moderate injuries if the hazards are not avoided. , di e IMPORTANT! The signal word IMPORTANT indicates possible property damages,... - Page 8 Safety • Always completely unwind the power cord. • Never place the appliance or other objects on the power cord. • Always take hold of the plug to disconnect the appliance from the power supply. Operating Personnel • The appliance may only be operated by a qualified personnel and trained specialist personnel.
-
Page 9: Intended Use
Safety Intended use As described below, every use of the appliance for a purpose differing and/or diverging from its intended standard use, is prohibited and considered to be an unintended use. The following is an intended use: – Washing dishes, glasses, pots, pans, etc. The appliance is intended for professional use only. -
Page 10: General Information
General information General information Liability and warranty All information and instructions in this instruction manual account for legal regulations in force, current level of technical engineering knowledge as well as our expertise and experience, developed over the years. If special models or additional options are ordered, or state-of-the-art technical solutions were implemented, the actual scope of delivery of the appliance may, in some circumstances, differ from descriptions and numerous drawings in this instruction manual. -
Page 11: Transport, Packaging And Storage
Transport, packaging and storage Transport, packaging and storage Delivery Check Immediately upon reception, check the delivery for completeness and possible shipping damage. In the case of visible transport damage refuse to accept the appliance or accept it conditionally. Mark and note the scope of damage in shipping documents/consignment list of the shipping company and lodge a complaint. -
Page 12: Technical Data
Technical data Technical data List of components of the appliance Fig. 6 8 / 32 110512... -
Page 13: Technical Specifications
10. Upper wash arm 11. Lower rinse arm 12. Lower wash arm 13. Valve 14. Wash baskets guide rail Technical specifications E500D LPR Dishwasher E500D LPR Name: 110512 Art. No.: Material: Stainless steel Basket dimensions (W x D x H), in mm: 500 x 500 Max. -
Page 14: Functions Of The Appliance
Technical data Version / Characteristics • Discharge pump • Cleaning agent dosing pump • Rinsing agent dosing pump • Booster pump • Double-walled door • Safety thermostat • Door contact switch • Appliance connection: ready to plug in • ON/OFF switch •... -
Page 15: Installation Instructions
Installation Instructions Installation Instructions CAUTION! Incorrect installation, positioning, operation, maintenance or misuse of the appliance may lead to personal injury or property damage. Positioning and installation, as well as repairs or fitting may be performed by authorised technical service only and in compliance with the applicable national law. -
Page 16: Positioning
Installation Instructions Positioning ATTENTION! Before the appliance’s installation, carefully check the conditions of the location in which the appliance is to be set to exclude any subsequent damages which may appear during operation. • Never place the appliance in humid or wet environment. •... -
Page 17: Water Connection
Installation Instructions • A multipolar switch with at least 3 mm opening should be connected near the device, and should be easily accessible. This device is designed for switching the appliance off in the case of installation, repair, cleaning or maintenance work conducted on the appliance. - Page 18 Installation Instructions Water pressure should correspond to the following values: Water MIN. MAX. pressure kg/cm kg/cm 2.03 4.07 58.01 If the water pressure is above the recommended value, it is required to install the reducing valve between the water supply system and the water connection of the appliance (Fig.
-
Page 19: Discharge Pump
Installation Instructions Discharge Pump The appliance is equipped with the discharge pump that, when properly set, provides for discharging water after washing. In such a case, the height of 680 mm cannot be exceeded (Fig. 1, Fig. 4). Fig. 4 Setting of the drain height through the drain pump. Cleaning Agent Dosing Pump The appliance is equipped with the cleaning agent dosing pump. -
Page 20: Operation And Maintenance Instructions
Operation and Maintenance Instructions beginning. The setting must be properly adjusted depending on the selected rinsing agent and hardness of the available water. NOTE: A selection of the rinsing agent and setting of the rinsing agent dosing pump should be ordered with a qualified technician who has experience with chemical products, to achieve the most efficient washing effects. - Page 21 Operation and Maintenance Instructions Functions of Operating Elements / Indicators (Fig. 5) ON/OFF button Washing cycle 1 (60 s) / draining button Boiler temperature indicator Washing cycle 2 (90 s) button Tank temperature indicator Washing cycle 3 (180 s) button Starting the Appliance Before switching the appliance on make sure that the following conditions are met: –...
- Page 22 Operation and Maintenance Instructions It is recommended that the water in the appliance should be changed every 40/50 washing cycles or twice a day. NOTE: To start the filling process, the appliance door must be fully closed. Due to safety reasons, the appliance cannot be filled in with door is open. The device is equipped with a safety thermostat inside the boiler and another safety thermostat inside the wash-tank.
- Page 23 Operation and Maintenance Instructions Interrupting and Finishing the Washing Process The washing process may be interrupted in one of the following two ways: – the appliance is switched off → The washing process is completely interrupted. – the appliance door is opened → Then the door is closed again during the cycle.
-
Page 24: Cleaning And Maintenance
Operation and Maintenance Instructions Cleaning and Maintenance • Before cleaning, disconnect the appliance from the power supply. • Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp or pointed implements may damage the appliance, and when in contact with live parts, they may cause electric shock. - Page 25 Operation and Maintenance Instructions Technical Service Maintenance Twice a year, a technical service should carry out the following inspections: – water filters cleaning; – descaling of heating resistors; – checking the condition of gaskets; – checking the condition of all other components; –...
-
Page 26: Indications And Tips
Do not use any dishwasher washing agents, which are indented for household use only. We recommend Bartscher F12kg dishwasher washing agent (art. No. 173070) or F12kgXTRA dishwasher washing agent (art. No. 173071) and Bartscher F10kg rinsing agent (art. No. 173072). -
Page 27: Possible Malfunctions
Possible Malfunctions Optimum Results To obtain optimum results during washing dishes, we recommend to proceed the following way: – Wash dishes only when the appliance is ready for work. – Dosing devices must always be properly set. – Always keep the dishwasher properly clean. Periods of Non-Operation If the appliance is not used for a longer period (holidays, interruptions at work etc.), follow the instructions below:... - Page 28 Possible Malfunctions Malfunction Possible Cause Solution The appliance does Water supply valve closed. Open the water supply not collect water. valve. Rinse arm nozzles clogged. Clean the nozzles and check the rinse arms for limestone. Solenoid valve filter clogged. Contact technical service to order cleaning.
- Page 29 Possible Malfunctions Malfunction Possible Cause Solution Washing results are Temperature in the wash- Thermostat failure or not satisfactory. tank is below 50°C/122°F. thermostat is not set correctly. Contact technical service to order repair. Washing cycle is too short for Select a longer washing the heavily soiled dishes.
- Page 30 Possible Malfunctions Malfunction Possible Cause Solution Salt container is almost Fill up the salt container (if empty. it is installed). Streaks and spots on Salt left-overs remain in the Be carful when filling the dishes. wash-tank. salt container, not to spill salt in the wash-tank.
- Page 31 Possible Malfunctions Error Codes Error Message Description The LED indicator light of the Device door is open. ON/OFF button lights up for 0.5 sec., and then goes off for 2 seconds. The entire process is repeated numerous times. The LED indicator light of the The water level is wrong.
-
Page 32: Disposal
Disposal Disposal Electrical appliance Electric appliances are marked with this symbol. Electrical appliances must be disposed of and recycled in a correct and environmentally friendly manner. You must not dispose of electric appliances with household waste. Disconnect the appliance from the power supply and remove power cord from the appliance.