Table of Contents
Advertisement
Step 4:
a) Install the clearance removal wedge and tighten the screw so that the column presses the front
part of the base.
It is normal for the screw and the clearance removal wedge not to be inside the base of the
patient lifter. As long as the screw is secured, the installation is safe.
b) Then tighten the main screw to secure the assembly.
Installation of the suspension
Step 5: For the Poweo® 200 equipped with a tilting suspension.
a) Prepare the installation:
•
Check the female jack plug found in the arm (1)
•
Remove the fixing axis (2)
b) Connect the jack plug to the female connector.
The female jack plug is inside the arm.
The arm end is recessed to lead the cable and protect it.
DOMU102_EN_8_20221201_ Poweo® 215-200 user manual
Final result:
1
2
11
Advertisement
Table of Contents
