Step 3: Secure the installation with the provided screw
and turn it inside the column, without tightening it.
It is VERY important to properly secure the assemblage:
the stability of the hoist highly depends on a strong link
between the base and the mast.
The screw is equipped with a thread lock to prevent the
screw from loosening. Install the screw on two or three
tread without completely tightening.
Step 4:
a) Install the clearance removal wedge and tighten the screw so that the column comes to
press on the front part of the base.
b) Then tighten the main screw to secure the assembly
.
Final result:
Installation of the suspension
Step 5: Attach the suspension with the security pin.
DOMU125_EN_v3_20221205_Poweo ® Quick Up user manual
9