Table of Contents
Advertisement
After each charge, be careful to unplug the power cord without pulling it to avoid damaging
the cord.
It is recommended to have 2 batteries to replace the discharged battery with the charged one.
Therefore, Poweo® will remain functional at all times.
Using the external charger
The external charger allows you to charge one battery while a second battery in being used.
To remove the Linak® battery from its compartment (device or wall charger):
1. Hold the handle with a hand facing up,
2. Close your hand while holding the handle,
3. Remove the battery by pulling towards you.
The handle top should be released from the bracket retaining lugs.
For installation, proceed with the reverse operations, taking care to verify that the battery is inserted
correctly.
The removal of the SCALEO® battery does not require any manipulation. It simply needs to be removed
by pulling it towards you. Its shape prevents it from being accidentally connected backwards or
improperly, either in the patient lifter or in the external charger.
The LED indicator of the charger displays the status of the recharge. Depending on the color of the LED
the user can monitor the different status:
CHARGER LED COLOR
Yellow -
Orange -
Alternately green and yellow -
Green -
Alternately green and orange -
18
●
The battery is not connected to the charger/ Reset
●
●
/
●
●
●
/
●
DOMU102_EN_8_20221201_Poweo® 215-200 user manual
MODE
and battery analysis
Fast recharge
Compensation charge
Slow charge/end of recharge
Error or battery overheat
Advertisement
Table of Contents
