Engines - Seawind 1600 Owner's Manual

P a g e | 7
4. Disconnect the shore power lead
• To re connect to shore power repeat the above steps in reverse order.
• To connect to the generator refer to section 5.8 in this owners manual.

1.2 ENGINES

1. Turn ON both ENGINE switches at the nav desk
2. Turn ON the throttle controls at the switch beside the control at the port helm
3. Press the POWER button on each engine panel at the foot of the port helm
4. Press the start button on each engine panel and hold until started
5. Press the WARM button on the throttle control to turn off the WARM light
6. The engines are now operable