Table of Contents
Advertisement
P a g e
| 67
• Put the transducers and sensors inside, cover all of the openings, leave all of the inside
doors open, and place a humidity extractor in each hull, grease all hinges and locks and
thoroughly clean the ship.
EXTERIOR
Rinse the whole boat down, the deck, the hulls, the front beam, the bottom of the mast, the
cockpit, etc..Grease all of the mechanical and moving parts with Vaseline (hinges, locks and so
on ). Protect your boat with a defense system and make sure that she is properly moored.
ENGINES
• Empty the engines' cooling system circuits and fill them with a liquid anti-gel.
• Fill the fuel tank to the maximum, to reduce condensation. Take reference from the
manufacturers leaflet manual.
• Grease the steering system.
Advertisement
Table of Contents
